The Shini USA industrial portable high temperature 450°F hot oil units with magnetic drive “seal-less” pumps vary from the traditional pumping style because the pump works via a drive magnet which “drives” the inner rotor attached in a second shaft operated by the motor.
Choose Shini USA’s 450°F hot oil units to optimize your operations.
Specs
Model
|
STM-907-HT-230
|
STM-907-HT-460
|
STM-1215-HT-230
|
STM-1215-HT-460
|
Heater (kw)
|
9
|
9
|
12
|
12
|
Pump (HP)
|
1
|
1
|
2
|
2
|
Flow
|
10 GPM @ 30 PSI
|
10 GPM @ 30 PSI
|
15GPM @ 30 PSI
|
15 GPM @ 30 PSI
|
Main Heating Tank Capacity (Gal)
|
1.58
|
1.58
|
1.8
|
1.8
|
Sub Heating Tank Capacity (Gal)
|
1.58
|
1.58
|
4.2
|
4.2
|
Voltage
|
230
|
460
|
230
|
460
|
Cooling Method
|
Closed Loop Shell & Tube
|
|||
Length (in)
|
28
|
28
|
32
|
32
|
Width (in)
|
11
|
11
|
13
|
13
|
Height (in)
|
29
|
29
|
32 | 32 |
Weight (lbs)
|
165
|
165
|
220
|
220
|
Price
|
$3,995
|
$3,995
|
$5,795
|
$5,795
|
Order Online | Order Online |
Download Product Information – PDF
Features of Our Portable 450°F Hot Oil Units with Magnetic Drive “Seal-less” Pump
The Shini USA portable high temperature hot oil unit with a magnetic drive pump features a seal-less pump design that utilizes a magnetic coupling to create a shaft seal. The magnetic force aligns the outer magnet and the inner magnet creating a leak-free seal. Other features include an easy to use microprocessor controller to monitor the process temperature throughout the heating/cooling process.
These 450°F Hot Oil Units Include:
- Maximum operating temperature of 450°F
- Heavy duty powder coated sheet metal cabinet
- Casters
- 1 gallon capacity
- Fill vent cap
- Sight gauge
- Low level switch
- Mag drive pump is a seal-less pump that utilizes a magnetic coupling to create a shaft seal
- Y-strainer on pump suction
- Internal by-pass valve
- Discharge pressure gauge
- Three phase electric immersion type
- Ultra low watt density design
- Completely insulated
- Pressure relief valve
- Low pressure switch
- Automatic air vent
- Audible Alarm
- Lockable Cabinet
- Illuminated Pump and Heater On/Off Switches
- Closed loop cooling with 2.3ft2 Copper “U” tube, 1/2″ Automatic solenoid cooling control valve flange mounted bundle to steel shell for easy service
- Main disconnect switch
- Three phase motor overload protection
- Start/Stop push buttons
- Phase reverse protection
To acquire all these worthwhile features and fully optimize your business’s operations, be sure to contact Shini USA and inquire about these 450°F hot oil units.